The ECD concept aims to encourage focused learning at floor level, offering slip-resistant carpeting and cushioned mats suitable for lying, reclining, kneeling, and squatting. Complementing this setup are low tables like the triangular TriTable-II or the cylindrical Gugl table, designed for floor-level instruction. Optional pen receptacles can be included in the cover panel.
If you would like to see more options, please contact KCSA and we will be delighted to discuss your needs and suggest a suitable solution for your classroom.
We will be in touch to chat about your ideas
To establish enjoyable, relaxed, and interactive seated learning areas on the floor, whether for individual or group activities, students can discover their designated space for the given task. Offered in round singles, rectangles, or 60° wedge shapes, the mats come in various colours, bringing vibrancy to any dull reading nook, underutilized corner in a classroom, or adding a fresh perspective to carpeted work areas.
Tent elements for creating individual withdrawal areas in the classroom for individual children or small groups. The triangular material elements can be combined with the mats from the Shift+ series to create tent configurations and nooks and crannies. Similarly, the textile sail-type elements can be fixed to any magnetic surface (cabinets from the Shift+ series) using magnetic fastenings. A tent pole, which can also be used in combination with the Gugl storage element and/or the triangular Shift+-Landscape mats, makes it possible to construct a round tent consisting of a maximum of 6 sail elements.
Textile sail element, consisting of a stretch fabric and glass fibre rods for tensioning the triangular surface. With 3 fixing points on the long and one fixing point on the short side.
Tent pole, consisting of a solid wood pole with stand plate made of HPL solid board and with a 6-way adapter in two heights, positionable using a bayonet fixing.
Shift+-Landscape mats, optionally with 1 to 3 fixing points (see above).
Magnetic fixings to fasten the sail elements to any magnetic surface.
Storage bag for transporting and storing the sail elements and curved glass-fibre rods.
Fire protection of upholstered mats optional according to DIN 66084 corresponding to classes P-c (low), P-b (medium), P-a (high).
The following material groups are available to choose from: Fabric sails: S77; Fabric cover: S40,64,82.
Padded mats, carpets and back support rolls. FloorFriends for floor-level learning
Padded mats consisting of a thick, foam-padded body with anti-slip bottom, side carrying loop and a black, all-round surrounding strap. Available in rectangular form or as a 60° wedge-shaped element to match the Shift+ cabinets. Can be used as a floor covering for one person or as a chair covering. The top seating surface consists of a hard-wearing, coloured covering.
Carpet consisting of a top surface made from black, hard-wearing artificial fibres and a rubberized, slip-proof bottom side.
With side carrying loop. Available in rectangular form or as a 60° wedge-shaped element to match the Shift+ cabinets.
Back support roll consisting of a foam-padded body with black side element and hard-wearing, coloured covering.
Fire protection of upholstered mats optional according to DIN 66084 corresponding to classes P-c (low), P-b (medium), P-a (high).
The following material groups are available:
Fabric cover: S40,64,82.
In our bean bags, comfort reaches new heights. The padded cloud elements ensure pure sitting comfort, supporting the body’s posture and allowing for constant repositioning. These bean bags encourage dynamic sitting postures, activating various muscle groups and promoting blood circulation, in contrast to the limited sitting positions offered by sofas.
Upholstered bag elements of different shapes, each comprising an inner bag with removable cover.
Inner bag filled with new, freshly expanded EPS polystyrene beans, with a grain of 3-6 mm diameter. Flame-retardant in accordance with DIN 4102 B1.
Cover made of Cordura® (polyamide 6.6 / nylon) with extreme tensile strength and abrasion resistance. The surface is water-repellent impregnated. The fabric is PFC-free and certified to Ökotex Standard 100.
Equipment. Model 09383 with carrying handle and 2 pockets.
The following material groups are available to choose from: Fabric cover: S41.
The air-cushioned seat shell of the PantoSwing cantilever classroom chair provides comfort throughout the academic day. The seat surface tilts forward and backward to generate a moderate rocking motion that promotes increased blood circulation and focus.
Forward-flexing cantilever chair
Seat shell made from double-walled, structured polypropylene for comfortable seating with air cushion effect. With covered seat fixing and grip hole. Optionally available with upholstered red seat or all-round fabric consisting of plastic core with taut fabric cover.
Freely-shaped table consisting of welded round steel-tube legs and a rectangular steel-tube frame. All steel parts are powder-coated. Single table with floor-level adjustment screws.
Frame consisting of welded round steel-tube legs and a rectangular steel-tube frame. All steel parts are powder-coated.
Single table with floor-level adjustment screws.
Table height of 71 cm and 76 cm.
Table top made of melamine-resin-coated chipboard with glued-on plastic or beech edge.
The following material groups are available:
Frame made of steel tube: M1
Top made of chipboard: L6
Further products on this page: Hokki Stool
Rectangular table with round tubular legs
Frame consisting of an all-round rectangular steel edging with welded-on table legs made from square tubular steel, powder-coated with coloured epoxy resin. Table with levelling screws, glide elements for hard or soft floorings or universal
glide elements, orwith 2 or 4 (circular Table) castors, 2 of which are lockable.
Table height 74 cm and 7 other heights.
Table top made from 19-mm or 25-mm melamine resin-coated, laminate-coated or veneered chipboard with glued plastic or solid wood edge or from rigid 13-mm HPL top. Equipped with angled corners in all cases.
The following material groups are available: Frame made of steel: M1; Top made of chipboard: L6; HPL-top: L4; Chipboard with laminate: L2; Top veneered: F1.
Further products on this page: JUMPER Ply Four.
Trapezoidal table with square tubular legs.
Frame consisting of an all-round rectangular steel edging with welded-on table legs made from square tubular steel, powder-coated with coloured epoxy resin. Table with levelling screws, glide elements for hard or soft floorings or universal
glide elements, or with 2 or 4 (circular table) castors, 2 of which are lockable.
Table height 74 cm and 7 other heights.
Table top made from 19-mm or 25-mm melamine resin-coated, laminate-coated or veneered chipboard with glued plastic or solid wood edge or from rigid 13-mm HPL top. Equipped with angled corners in all cases.
The following material groups are available: Frame made of steel: M1; Top made of chipboard: L6; HPL-top: L4; Chipboard with laminate: L2; Top veneered: F1.
Further products on this page: JUMPER Ply Four.
Stackable four legged tables consisting of welded round tubular steel legs, some of which are offset outwards. Desks with four plastic, felt or 2C universal glide elements or with glide elements and two lockable castors, available in 7 fixed heights or with 5-position Allen-key height adjustment.
Frame consisting of welded round tubular steel legs, some of which are offset outwards, with a central edging made from rectangular steel tubing, all powder-coated. Some models have tube-in-tube Allen-key height adjustment (see table).
Desks with four plastic, felt or 2C universal glide elements or with glide elements and two lockable castors.
Table in 7 fixed heights or with 5-position Allen-key height adjustment.
Table top made from melamine resin or laminate-coated chipboard with glued plastic edge or high-strength solid HPL top.
The corners have 25 mm rounding.
Function: It is possible to combine the two mirrored concave-convex basic shapes in many ways to create circles, rows and groups. In the park position, the tables are stackable up to a height of six tables and are equipped with stack protection at the lower edge of the top frame.
Warning: A maximum of three stacked (unloaded) tables may be moved together on castors.
The following material groups are available:
Frame made of steel: M1
Top made of chipboard: L4; HPL-top: L4
Chipboard with laminate: L2 (white writable).
Further products on this page: PantoMove-LuPo.
Skid desk
Frame made from powder-coated tubular steel with central upright on flat-ended skids with plastic kick protection. Desk legs made from flat oval steel tubing and cross-strut made from circular steel tubing.
Table in 6 fixed heights or with 5-stage grid height adjustment using an Allen key fixing.
Table tops are – Chipboard with laminate coating and seamless cast-on (PUR) polyurethane safety edge.
– Chipboard with laminate coating and glued-on plastic edge.
– Chipboard with melamine resin coating and seamlessly cast-on (PUR) polyurethane safety edge.
– Chipboard with melamine resin coating and glued-on plastic edge.
– Durable LIGNOdur safety board with rounded edge.
Equipment and options
Also with lattice-type book storage, plastic box or different kinds of chair suspension.
Warning: The desk height may vary depending on the type of desktop and the glide elements.
Polyurethane edges are extremely tough. However, their colour may change over time.
The following material groups are available:
Frame made of steel tube: M1,(chrome-plated)
Top made of LIGNOdur: L1;
Top made of chipboard: L4
Top made of chipboard with PUR edge: L2; Chipboard with laminate: L4.
Occasional-element with integrated storage space. FloorFriends for floor-level learning
Body made from deep-drawn, conical ABS plastic. The body is stackable.
Top made from HPL top. The top can be removed to access the storage space and is equipped with a groove to protect it against slipping. The storage space can accommodate back casters (09379), carpets (09440) or upholstery mats (09445).
Padded mats consisting of a thick, foam-padded body with anti-slip bottom, side carrying loop and a black, all-round surrounding strap. The top seating surface consists of a hard-wearing, coloured covering.
Fire protection of upholstered mats optional according to DIN 66084 corresponding to classes P-c (low), P-b (medium), P-a (high).
Equipment: Optionally available with a black polypropylene pen insert in the top.
The following material groups are available:
Body made of plastic: C (white, black grey RAL 7021);
HPL-top: L4;
Fabric cover: S40,64,82.
07:30 am - 04:30 pm
Monday - Friday